Tufit is a water base coating which provides a protective base to your expensive paints.

Tufit is available in dry free flowing powder form, Wet form for Interiors.

Tufit consists of high quality white cement & imported cementation polymers , high Quality acrylic polymers and specialty chemicals like biocide, inert fillers and other chemical additives.

1. Categories in TUFIT Wet

1. Wet Mineral Plaster
2. Builders Putty
3. Special White
4. Deluxe wall putty
5. Textures – Roller Finish, Scratch & Spray
6. TUFIT Gold, Copper & brownge (Metallic paints),
• Washable
• Medium
• Rough
• Crack Filler

2. Categories in TUFIT Dry :

1. Ready to Mix
2. Uniform
3. Dry Cement Plaster
4. Tile Fix
5. Exterior
6. Water Proofing Slurry

Number of coats would depend on quality of surface receiving it, normally 2 coats are ideal.

Yes, Tufit Dry Cement Plaster has a unique formulation which makes it suitable for damp wall.

Even plaster surface, in line and loose particles, oil stains should be removed with the help of wire brush, putty blade or emery stone.

Surface should be pre-wetted prior to application. This helps in providing a strong bond with substrate especially for Dry Cement Plaster and hot climates.

Yes, Tufit Dry Cement Plaster has a unique formulation which makes it suitable for application on moist surfaces.

Yes, Tufit provides a breathable surface and allows any trapped moisture to move out keeping the wall dry and clean.

For normal application, thickness should be 1 mm to 1.5 mm is optimum.

Prefer TUFIT Medium / Rough for interior : Prefer TUFIT Uniform for exterior to cover undulations.

All types water based paints including our paints (Surya) are suitable for finish coat on Tufit.

Curing is not required for Tufit after application.

Although coverage would depend on surface Quality, in general, coverage for Tufit Dry is 12.5 to 15.5 KG/ 2 coats /Sft , for Tufit Wet is 7-10 KG/ 2 coats /Sft.

Yes, use of stirrer to mix Tufit and water is recommended for proper mixing.

Tufit is the putty of its kind, which is suitable for external as well as internal application.

Ideally the finished surface do not require any dressing by Emery Paper but if at all it is done, the paper should not be less than 500 number.

Tufit is a much better product than POP as POP is extremely hygroscopic and is susceptible to the ingress of moisture, which damages the surface. As Tufit is cement based and water resistant such problems do not arise. More over the coverage of the paint is much more in case of Tufit.

No, TUFIT Wet Mineral Plaster is not for instead of plastering. TUFIT Ready Mix Base coat plaster is suggestible instead of plastering.

Suggested to apply PRIMER before the application of any kind of paint to get the uniform back ground, better hiding and to reduce the paint quantity.

Yes, TUFIT Ready Mix Base coat plaster is suggestible instead of plastering.

All types of texture can match exterior.

TUFIT deluxe is suitable for the smoothness of the wall.

No, TUFIT Wet is not supposed to apply on bare wall.

Arrange link of application process in product CD.

Wall should be completely dry before priming / painting. Normally it takes 6 to 10 hr @ normal room temperate .

VAT 12.5% can imply for local sales: C.S.T 2% can imply for out of state sales against ‘c’ form.

Yes, SURYA COLOURS is manufacturing all types of water based paints from start to end

LASYA which makes you to dance (DISTEMPER)

BUDJET which plans your budjet (EMULSION)

DELICE which makes you delightful (EMULSION)

LAWISH which makes you feel lavishness. (EMULSION)

Budjet Interior, Lasya & Delice is suitable for interior decors.

Budjet Exterior, Lawish is suitable for exterior decors.

Lasya is the most economy product to cover middle class mankind

INTERIOR COMBINATIONS:
BARE WALL » ROUGH PLASTERING (or) TUFIT ROUGH » SPONZE PLASTERING (or) TUFIT MEDIUM or UNIFORM » TUFIT WET MINERAL PLASTER or TUFIT DELUXE or TUFIT SPECIAL WHITE » PRIMER » LASYA or DELICE

EXTERIOR COMBINATIONS:
BARE WALL » ROUGH PLASTERING or READY MIX BASE COAT » SPONZE PLASTERING or UNIFORM » TUFIT EXTERIOR or DRY CEMENT PLASTER » PRIMER » BUDJET or LAWISH

TEXTURE COMBINATIONS:

EXTERIOR:
BARE WALL » ROUGH PLASTERING or READY MIX BASE COAT » SPONZE PLASTERING or UNIFORM » TUFIT SCRATCH or ROLLER » PRIMER » BUDJET or LAWISH

BARE WALL » ROUGH PLASTERING or READY MIX BASE COAT » SPONZE PLASTERING or UNIFORM » TUFIT EXTERIROR or DRY CEMENT PLASTER » PRIMER » BUDJET or LAWISH » TUFIT SPRAY TEXTURE.

INTERIOR:
BARE WALL » ROUGH PLASTERING or TUFIT ROUGH » SPONZE PLASTERING or TUFIT MEDIUM or TUFIT UNIFORM » TUFIT SCRATCH or ROLLER » PRIMER » LASYA or DELICE

BARE WALL » ROUGH PLASTERING or TUFIT ROUGH » SPONZE PLASTERING or TUFIT MEDIUM or UNIFORM » TUFIT WET MINERAL PLASTER or TUFIT DELUXE or TUFIT SPECIAL WHITE » PRIMER » DISTEMBER or DELICE » TUFIT SPRAY TEXTURE.

Customer Care Representative
11-300, Surya Nagar, J.P.Road,
Piduguralla. Guntur Dist, Andhra Pradesh.
Phone : +91 8649- 255559.
Fax : +91 8649- 255559